Vizex Options

Select Tools | Options | Vizex to set Vizex editing and display options per-project. For advanced global options, see: Vizex System Options

General

The General tab has the following options:

Auto load last view

The form sets you load in the Form Sets Pane can be saved as a form set. This higher-level set defines a Saved View of your data. To save your current display and form set settings as a Saved View, click the File | Save menu option. For more information refer to the Vizex Form Sets Pane topic.

Select the Auto Load Last View option to load the Default Saved View at the end of each Vizex session.

Enable Data Popup Properties

When you hover the mouse over a display object, a semi-transparent property window is automatically displayed by default. If you want to disable this function completely, uncheck this check box.

The default Popup delay (the period between hovering your cursor over an object and the appearance of the popup window) is 1500 milliseconds. If you want to increase this delay, type a new value (in milliseconds) in this box.

You can also temporarily override the default setting by right-clicking on a layer in the Display Pane and selecting (or deselecting) Data Popup.

Field of View

Select an Angle of View option to set the default field of view of the 3D camera:

Option	AOV	Angle Type	35 mm camera equivalent
Long telephoto	6.87°	V	200 mm
Telephoto	16.1°	V	85 mm
Standard	27.0°	V	50 mm
Micromine default	45°	V	~28 mm
Google Earth default	60°	H	~28 mm
Wide angle	61.9°	V	20 mm
Ultra-wide angle	90.0°	V	12 mm
Custom	<= 100°	V	variable

(AOV = angle of view; V = vertical; H = horizontal)

Vertical angle of view (degrees)

If you have chosen to define a Custom field of view, enter a Vertical angle of view value. The value you enter must be between 1° and 100° (degrees).